SD & MICRO SD CARD CASE Remixed by Natoshi Sakamoto << Tips are very welcome!
. 2x STL File(s)
Bounding Box Sizes
. 1x SD&MicroSDCardCase-Tray = [X:85.20mm Y:50.28mm Z:3.45mm] [X:0’3 3/8″ Y:0’2″ Z:0’0 1/8″]
. 1x SD&MicroSDCardCase-Cover = [X:86.60 Y:53.98mm Z:5.00mm] [X:0’3 7/16″ Y:0’2 1/8″ Z:0’0 3/16″]
. Rafts: Shouldn’t be necessary unless your print surface is particularly uneven
. Supports: No
. Resolution: 0.1 mm
. Infill: 15% (The outer cover should print completely solid)
. Filament Material: PLA
It should also print well in PETG as long as that filament type is selected. NOTE: As noted in the comments, the snap closure nubs will probably last longer in PETG.
The SD card slots are loose to allow for easy pull-out; the micro SD card slots hold the card edges with friction. You may want to “break in” the micro SD card slots with a throwaway card or a craft knife if you find the slots too tight, or if the cards shoot out when pushed out of the tray.