Description

BUSINESS CARD CASE Remixed by Natoshi Sakamoto << Tips are very welcome!

>> DONWLOAD PDF <<

American Standard (3.5″ x 2.0″) and European Standard (90mm x 50mm) Business Card Case

The model has two parts, the casing and inner clever spring. Load the spring with business cards, snap it into the casing and you are ready to go! In case you run out of cards, easily remove the spring with your thumb and load it again as before.

Designed by the be3D Creative Team:
Tomáš Kubata – Designer
Martin Žampach – Creative Director

. 4x STL File(s)

Bounding Box Sizes

. 1x DiamondCase90x50 =  [X:96.00mm Y:58.67mm Z:12.41mm] [X:0’3 3/4″ Y:0’2 15/16″ Z:0’0 1/2″]

. 1x Spring90x50 =  [X:92.00mm Y:52.00mm Z:8.90mm] [X:0’3 5/8″ Y:0’2 1/16″ Z:0’0 3/8″]

. 1x DiamondCase85x55 = [X:91.00mm Y:63.99mm Z:12.80mm] [X:0’3 9/16″ Y:0’2 1/2″ Z:0’0 1/2″]

. 1x Spring85X55 = [X:87.00mm Y:57.00mm Z:8.90mm] [X:0’3 9/16″ Y:0’2 1/2″ Z:0’0 1/2″]

. Rafts: No

. Supports: No

. Resolution: 0.15mm

. Infill: 20%

. Filament Material: PLA

Notes

For better results, print each part separately. The case on higher resolution for finer details and the spring with no support when using the nozzle diameter 0.4 mm (3 perimeters).

THINGIVERSE – BUSINESS CARD CASES by YSoft_be3D